2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.

3. The slitting control of the slitter and rewinding machine is divided into static and dynamic slitting: when the set length is reached, the machine will stop accurately, and then static slitting will be processed. After slitting, the operation will restart. not stopping signal sent slitting, cutting slitting dynamic movement in the material. 

Structural advantages of slitting and rewinding machine:

The main part of the slitting and rewinding machine is equipped with the main shaft for processing the paper tube. The front end of the main shaft is fixed on the base with a set of bearings, and a pulley is installed in the middle of the set of bearings. A compression cylinder is installed near the base. A set of support rod bearings are installed at the upper end of the rod to support the main shaft.

The main cutter shaft is installed on the upper end of the slitter and rewinding machine, and a plurality of blades are arranged on the upper end of the slitter and rewinding machine, and the blades are arranged at a certain gap. A support cylinder is installed in the middle.