1. A high impurity prolapse efficiency

The material layer between the polyester mesh and the roller is very thin, the stroke of the impurities in the pulp is short, the negative effect from the pulp layer during the extraction process is small, and the centrifugal force generated by high-speed operation is used to make the filler and ink particles Other fine impurities are easily removed, and the ash removal rate of the slurry after washing is more than 99%.

2. A high dewatering efficiency

Extremely thin slurry layer and high centrifugal force are not only beneficial for the removal of fine impurities, but also for the removal of moisture. The equipment has a lower feed concentration and a higher pulp concentration, which enables the dewatering rate of the washed pulp to reach 90. % Or more. 

3. The slurry quality is uniform after washing

The lower feeding concentration and the uniform slurry distribution of the slurry feeding system make the slurry uniformly distributed in any direction. In addition, the constant extrusion and centrifugal forces during the dewatering process make the slurry always uniform. Consistent dehydration power, so the quality of the pulp is uniform and stable.

4. Small footprint and large production capacity

Although the thickness of the material layer is small, the high speed of the equipment determines that the production capacity per unit area is quite high. Therefore, the same production capacity has a much smaller area. 

5. Low power consumption and low installation cost

The dehydration power of this equipment comes from the pressing force of the screen roller and the centrifugal force generated by the high-speed operation. It does not need additional pressure such as vacuum defect suction. Compared with the horizontal belt washing machine, the vacuum pump is omitted and the power consumption is reduced. Compared with the vacuum pulp washing machine, the installation cost is reduced, and the washing and dewatering effect is much better than any equipment including the two. 

6. Simple operation, saving manpower

The equipment is highly automated and requires no manual operation during normal operation. The polyester net with guide strips eliminates the risk of deviation of the net, and the well-designed cantilever type screen change structure makes the screen change operation easier and faster, saves time and effort, and improves the equipment efficiency. 

7. Clean environment and safe operation

Fully enclosed structure design, so that all the moisture and dehydrated slurry are concentrated inside the equipment and discharged uniformly without any impact on the external environment, keeping the working environment clean, and completely isolating high-speed components from the operator. To eliminate hidden dangers.